A bit of my older work

I has been a while since I have gone through my portfolio so I decided to take a look and share some of my other art work.

These digital images were done for one of my design classes in 2002. The astrology images were done using Illustrator and Phtoshop and the angel was created with Illustrator using the gradient mesh tool.

I decided to check out Ety's pounce function today and took a look at the undiscovered section. After only 2 pounces I was captivated by the pieces Tuavus Design offers. Each piece they have in their shop is made from reclaimed wood. Beautiful, functional, eco-friendly lighting products!





"Tuavus design is a small design studio and workshop situated in north London, England. The company was founded by two designers with the concept of creating functional pieces of sculpture from solid reclaimed timber. We like to think that through simple but considered styling, our design work creates an interesting juxtaposition between the natural materials, metal and plastic, while also allowing the natural beauty of the wood to speak for itself."
- Tuavus Design

Surprised

I have decided to do a bit of playing (trial and error work) with forging. It is something that I have been wanting to do for a while now but just haven't gotten to. Partially because the 4 rings I have forged from scrap sterling I heated with a torch instead of having a proper fire. We have an old stove outside that seems will be very good for making a proper fire but it was in bad need of cleaning before any actual work could be done.

The other day I started playing with a necklace for myself. It will be a torque style with a lot of hammering. Looking at the piece after I started I realized I either needed to clean out the stove and get some good coals going or I would go through a lot of map gas with a torch. So I set about cleaning the remains of previous burns from the stove.

After I pulled out some of the burned matter with a garden trowel I looked deeper into the stove and was surprised to find plants growing. It seems that nature will find its way. I really didn't expect to find anything growing in the stove because I didn't think there would be enough light. However, these little plants, I believe they are rose a sharon, decided there was enough of everything they needed right there.

A Handmade Registry

Have you ever thought :
"I wish I could REGISTER for a HANDMADE WISH LIST to send to my friends and family for birthdays, holidays, and special occasions!"?
myHandmadeRegistry.com is a networking site for buyers and sellers to find and share their favorite handmade items. This site is a place where everyone can create a personal page with a list of their favorite items from only HANDMADE RETAILERS! There are also groups within the community for expectant parents, a house-warming group to share decorating tips on a budget and find that special accent piece, and one for the $5000 handmade wedding. You can find more information about what inspired Dorana of a Dorana Design and ddots to create myHandmadeRegistry.com here.

With the sharing of information and handmade items that goes on in this site you can often find those special handmade items you have been looking for at a fraction of the cost you would pay at the big chain stores. It is also a great place to see what special things other people have discovered. Each day they feature a member's wish list on their front page.

I found out about this site this morning when I received a convo through Etsy.com letting me know one of my rings was in todays featured wish list. I will be signing up for this site myself. I know I am one of those hard to shop for people who can never remember the things that I want when someone asks "what do you want for your birthday." This will be a great solution to that issue once I have created my wish list. Not only will family be able to see what I have been wanting but it will also support the handmade community.

I think we've been adopted

Last Saturday my husband and I went out back to work a bit in what will be our garden. Our next door neighbor informed us that a baby squirrel had fallen out of the tree in our front yard not long before we came out. At that point the little squirrel was in her yard so we got some peanut butter and bread. It wasn't long before the squirrel began to much. We left the squirrel alone and began to work on raking out the garden aria. A while later my husband noticed that the baby squirrel had come into our back yard and was sitting on our stump. He sat down indian style a little way away from the stump and the little squirrel ran over and climbed over his legs and just made itself comfortable. The squirrel didn't seem to want to leave so we sat for a while then my husband carefully moved his legs so he could stand up without startling or hurting the baby squirrel. He tried putting the squirrel back on the tree it had fallen from but as we walked away the squirrel followed.
For the rest of the afternoon the squirrel followed my husband around the yard making noises the whole time and trying to climb up his leg every time he stopped.

At one point I was sitting on the back steps and the squirrel came up for some more peanut butter, ate a little bit and then climbed onto my lap for a while. After giving him some water my husband put his gloves on and put the squirrel back on the tree it fell from and we quickly went back to the back yard. Yesterday our neighbor, who often has food out for the birds and squirrels, said it came out of our tree and headed over there for a bite to eat.

Since we don't know if the mother is still around and its sibling who fell with it didn't survive, we will be keeping an eye out for this cute little guy throughout the spring and summer and it's sibling will have a good resting place in our garden.

Woven Sterling Bracelet

This bracelet was hand woven from 22 gauge sterling silver wire. When finished its diameter is about 3mm (0.1181 inches). Once the wire was woven it was "drawn" to make the weaving more uniform and tighten the weave. Drawing is the process of pulling the wire through an appropriate size hole in a metal plate. Once the woven wire is "drawn" it is cut to the proper length and end caps are soldered on to accommodate a jump ring and lobster claw. The wire for this bracelet was cut to 6.5 inches once the end caps and clasp were put on it was a finished length of 7 inches.






Interesting fact:
It takes about 1 foot of wire to make 1 inch of woven bracelet.






Behind the scenes:
These are the tools I use in the weaving process. The whole thing begins with a spool of 'dead soft' wire. The wire is cut into 1-2 foot lengths for weaving. If the wire lengths were any longer they would become difficult to use because of a process called 'work hardening' which is where the wire gets harder and stiffer as its molecules align from being worked with. The wire cutters are an obvious choice of tools as something is needed to cut the spooled wire into shorter lengths ;) The ice pic is used to form the wire into each loop as it is pulled through a previously made loop. The jaws of the pliers are smooth so that they will not mar or pinch the wire as they are used to pull the wire through the weaving proces. I have found the glove to be a very important part of making woven wire. I only wear the left of my winter gloves as that is the hand that I use to hold the wire while weaving. It is not absolutely necessary to wear a glove while weaving but when I don't my pointer and thumb fingers get very tender from the pressure of holding the wire while weaving.

TabMaille

Sarah has created a great look with these recycled beverage tabs.

The 'scales' for these purses came from the quasi evil yet environmentally conscientious Soda Dragon. In a daring venture Sarah has struck a bargain with this horrid inflictor of calories and sugar. Risking life and limb she entered its cooler offering a way for it to recycle its ever mounting sheded scales. In gratitude the Soda Dragon has agreed to lessen its infliction of calories and sugars upon the fine people of the land.

Well that is my take on it anyway ;)




Here is the "real" story from Sara's Shop...

"My pop tab purses and accessories are made from 100% post-consumer aluminum beverage can tabs that have been thoroughly washed prior to assembly. I use other recycled materials when possible but new materials when necessary to ensure quality and durability."


"My smallest size purse (excluding the coin purse) is composed of over 400 post-consumer recycled aluminum beverage can pull tabs, which are purchased from a local recycling facility. Various charities, such as the Ronald McDonald house, collect the tabs and sell them to the facility as a fundraiser."






"After being double-washed in antibacterial soap and sorted for uniformity, the tabs are bound together to form a chainmail-type mesh, and a purse is born. I have five standard styles, but often make one-of-a-kind purses that are designed as I go along."